Koch Chemie Heavy Cut H9.02

Innovative compound for rapid renovation of heavily weathered paintwork, removal of deep scratches and effective removal of paint mist and sanding marks up to 1,200 grit. Thanks to its extremely homogeneous abrasive grains, Heavy Cut 9.02 achieves an exceptionally high cutting level with an excellent level of shine. Can be polished for extended periods without sticking and with low dusting. Ideally suited to all types of paint (both soft and scratch resistant). Abrasion Level: 9.0 Gloss Level: 6.0

FAQ:

Q1: What is Koch Chemie Heavy Cut H9.02?

Koch Chemie Heavy Cut H9.02 is a heavy cut polishing compound specially formulated to effectively remove serious automotive paint imperfections, such as deep scratches, swirls and oxidation.

Q2: How to use Heavy Cut H9.02 for paint correction?

Apply a small amount of Heavy Cut H9.02 to the Koch Chemie Heavy Cut Pad or a suitable polishing pad. Use an electric polisher at the recommended settings. Work methodically over the surface to address paint defects.

Q3: What types of imperfections can Heavy Cut H9.02 handle?

Heavy Cut H9.02 is designed to handle serious paint imperfections, including deep scratches, heavy swirl marks and oxidation.

Q4: Is Heavy Cut H9.02 suitable for all types of automotive paints?

Check product specifications, but in general Heavy Cut H9.02 is suitable for a wide range of automotive paint finishes. Always test on a small area to ensure compatibility.

Q5: Can I use Heavy Cut H9.02 by hand or is an electric polisher necessary?

Heavy Cut H9.02 is designed to be used with an electric polisher for optimal results. Although manual application is possible, maximum performance is achieved with a machine.

Q6: How should I clean after applying Heavy Cut H9.02?

Clean the surface using a clean microfiber after applying Heavy Cut H9.02 to remove polishing residue. You can also help yourself with Koch Chemie Panel Preparation Spray to remove residue.

Q7: Is Heavy Cut H9.02 suitable for use on plastic surfaces or automotive trim?

It is recommended to mask or protect plastic surfaces and trim before application.

Q8: How much pressure should I apply when using Heavy Cut H9.02?

Follow the manufacturer's recommendations for optimal pressure when using Heavy Cut H9.02. In general, moderate pressure is often sufficient.

Q9: Can I apply a wax or sealer after using Heavy Cut H9.02?

Yes, after using Heavy Cut H9.02 you can apply a wax or sealant to protect the treated surface.

Q10: How often should I use Heavy Cut H9.02 for paint correction?

The frequency depends on the condition of the paint and the needs for correction. In general, periodic use can help keep paint in good condition.